Copper 15 tons water and oil radiator assembly for 15 tons hydraulic excavator Description Thickness of new type radiator fin is 0.3MM, and it is water corrugated type ,which has greater strength . Tube thickness is 0.6mm- 0.8mm, which is 2-3 times of original type . so there is no need to worry about pumping . The thickness of new radiator fin is 2-3 times that of the tube-fin type , which can resist the impact of the stones in the vehicle work. When the surface of the radiator is covered with dust and dirt, it can be directly washed with a high pressure water gun . There are some hair and dust that are difficult to remove, and even the surface of the radiator can be sprayed with an alcohol lamp. The new radiator is made of high strengty aluminum alloy, which has an absolute advantage over the traditional type in terms of cost. Because the new radiator has a solid structure, there is no need to install a middle room . Under the same volume , cooling capacity area is larger, which invisibly reduce the cost. Key Specifications: Power from 50KW to 1500KW Radiator Maximum Size : 3000*3000*3000(mm) Products include: excavators, loaders, bulldozers, mining vehicles, etc Product advantages: The shock resistance is particularly outstanding, and the radiator can withstand pressure of 7 MPa. Product advantages: the body heat dissipation structure, outstanding h eat dissipation performance, the wall thickness of the heat pipe is 5 ti mes that of the ordinary water tank, the advantages of shock and torsi on resistance are obvious, and the product life is increased by 120%